ENCLOSED BUILDINGS AND TRAILERS
| A. | Fabricated Buildings | ||||
| WOOD EXTERIOR | |||||
| Standard Features: | |||||
| - 6 " Steel I BEAM Frame | |||||
| -2x4' on 16' centers | |||||
| - 1/2" ext. plywood sheathing | |||||
| - Vinyl siding | |||||
| - R11-14 insulation | |||||
| - 1/4" Vinyl covered | |||||
| PART | MODEL | DESCRIPTION | |||
| NO. | |||||
| BDG1 | BUILDING | 8' x 8' x 8' | |||
| BDG2 | BUILDING | 12' x 8' x 8' | |||
| BDG3 | BUILDING | 16' x 8' x 8' | |||
| BDG4 | BUILDING |
|
|||
| B | Metal | ||||
| Standard Features: | |||||
| - 6 " Steel I BEAM Frame | |||||
| -2x4' on 16'centers | |||||
| Exterior 29'gauge Steel | |||||
| - Forklift pockets | |||||
| - Metal siding | |||||
| - R11-14 insulation | |||||
| - 1/4" Vinyl covered | Remediation Building | ||||
| PART | MODEL | DESCRIPTION | |||
| NO. | |||||
| BDG1 | BUILDING | 8' x 8' x 8' | |||
| BDG2 | BUILDING | 12' x 8' x 8' | |||
| BDG3 | BUILDING | 16' x 8' x 8' | |||
| BDG4 | BUILDING | 20' x 8' x 8' | |||
| C. | Enclosed Containers | ||||
| Standard Features: | |||||
| - Vinyl or metal exterior siding | |||||
| - Barn-style rear doors | |||||
| PART | MODEL | DESCRIPTION | |||
| NO. | |||||
| SCO1 | 20' Container | ||||
| SCO2 | 40' Container | ||||
| D. | Enclosed Trailers | ||||
| Standard Features: | |||||
| - Single or Double Axle Enclosed Trailers | |||||
| - 3/8" Plywood walls and ceilings | |||||
| - 3/4" Plywood flooring | |||||
| - Wiring harness and trailer lights | |||||
| PART | MODEL | DESCRIPTION | |||
| NO. | Dimensions / # axles / GVWR (#) / Payload (#) | ||||
| TRL1 | TRAILER | 10.' x 6' " x 5' 5" / 1 / 2990 / 1790 no brake | |||
| TRL2 | TRAILER | 10.' x 6' " x 5' 11" / 1 / 3500 / 1800 | |||
| TRL3 | TRAILER | 12.' x 7' 6" x 6' 5" / 2 / 7000 / 4700 | |||
| TRL4 | TRAILER | 16.' x 7' 6' x 6' 5" / 2 / 7000 / 4400 | |||
| TRL5 | TRAILER | 18.' x 7' 6" x 6' 5" / 2 / 7000 / 4250 | |||
| TRL6 | TRAILER | 20.' x 7' 6" x 6' 5" / 2 / 7000 / 4100 | |||
| TRL7 | TRAILER | 24' x 7' 6" x 6' 5" / 2 / 7000 / 4100 | |||
| TRL8 | TRAILER | 30.' x 7' 6" x 6' 5" / 2 / 9800 / 4100 | |||
| E. | Building / Trailer Accessories | ||||
| PART | MODEL | DESCRIPTION | |||
| NO. | |||||
| FAN1 | Haz. Location Wall Mounted Exhaust Fan w/ | ||||
| cowl | |||||
| FAN2 | Haz. Location Wall Mounted Heater w/ | ||||
| thermostat | |||||
| Vents | Louvered vents | ||||
| GTL1 | Gas Tight Interior Light | ||||
| SPM1 | 1" Convoluted Polyester Noise Absorption | ||||
| Material (per foot of linear length) | |||||
| Floor Steel | Diamond Steel Decking per foot | ||||
| INS1 | 1" Wall Insulation for Trailers (per linear foot) | ||||
| EXH1 | 6" Extra Height for Trailers (per linear foot) | ||||
| JACKS | Front/Rear Stabilizer Jacks (2 per set) | ||||
| Equipment Installed Per Class 1, Div 2 | |||||
| FAB1 | SVE System | ||||
| FAB2 | Air Sparge System | ||||
| FAB3 | Air Stripper | ||||
| FAB4 | Oil / Water Separator | ||||
| FAB5 | Control Panel | ||||
| FAB6 | Pumps | ||||
| FAB7 | Level Switch | ||||
| FAB 8 | Pressure and Temperature Switches | ||||
| FAB9 | Moisture Separator | ||||
| FAB10 | DPE | ||||
| Fab11 | All Electrical Hookups for above per hour | ||||
| ULC1 | UL Certification of Building or Trailer | ||||
| Note: Need UL Panel, XP Motors, XP valves | |||||