630 West Street · Naples, FL 34109 · USA · Walnut Creek, CA · USA
|
Onion Enterprises sells and rents vapor extraction technologies to cost effectively abate your vapor problems. OE's typical vapor extraction system consist of a Blower, moisture separator, high tank shut-off, vacuum gage, inlet filter, silencer, skid or trailer mounted and control system. System can be specialty coated for aggressive or corrosive gasses. To help the OE team serve you better we have attached our simple vapor questionnaire that can either be faxed or mailed in. Principal of Operation
A small, fixed, gauged clearance is maintained between all of the moving parts in the pumping chambers. This means that there is no friction (no wear) in the pumping chamber and therefore no lubricant required in the pumping chamber. The wearing parts of the Claw are well isolated from the heat and contaminates usually found in pumping chamber. The wearing parts of the Claw primarily consist of bearings and gears which are thermally separated from the pumping chamber by a double endplate design with an atmospheric air space |
|
|
PRODUCT INFORMATION
Partial
List of Products Our
step by step protocol makes the difference
The
Step by Step Process Insures the Product OE OX - Back to Product Line
Thermal
Oxidation Thermal
Oxidation is a system that uses the heat of
the oxidation process to burn pollutants present
in your waste exhaust. Pollutants such as Volatile
Organic Compounds (VOCs), Hazardous Air Pollutants
(HAP's) and odors are oxidized to carbon dioxide
and water. Our OE OX unit operates unit operates
using several types of burners depending on
the process stream. High VOC Destruction levels
greater than 99.99 can beachieved with the OE
inward fire burner. The OE OX is compact and
can be installed at the emission source. When
haloginated compounds are treated a scrubber
and neutralization system is added.
High
VOC Destruction Efficiency
The OE OX system is the "Smart" Technology
for eliminating VOC's. Regulated by a
PLC, the OE OX allows you to directly
input and log data. Capacity ranges from
25 to 25,000 cubic feet per minute and
VOC loading range goes up to 20,000 ppmv.
The OE OX can Achieve greater that 99%
destruction of VOC's with low NOx emissions.
Features
A
patented system that uses advanced oxidation
processes for the removal of organic contaminants
from the water. CAV-OX combines hydrodynamic
cavitation (which causes the water to form hydroxyl
free radicals), ultraviolet light radiation,
and when needed chemical catalytic injection
to treat the contaminated water.
The
benefits of this system are:
The
system has already been tested and proven on
many of the tougher chemicals like MTBE,
TCE, PCE, TCA, BENZENE,
PHENOLS.
OE
offer Liquid Ring Pumps in both water and oil
sealed. Both pumps offer vacuum up to 29" Hg.
The flow rate can be sized from as small as
10 SCFM to greater than 2500 ACFM. These pumps
are reliable and are perfect for vapor extraction,
dual phase remediation, and bioslurping.
Oil
Sealed Liquid Ring Vacuum Pump Package, equipped
with the following items:
Thermal Oxidation and Soil Extraction Thermal/Catalytic Oxidation is a system use the heat of the oxidation process to burn vacuum-extracted hydrocarbon vapor from the contaminated soil or from air stripper off gases and destroy them by using a thermal or catalytic oxidation process.st. Pollutants such as Volatile Organic Compounds (VOCs), Hazardous Air Pollutants (HAP's) and odors are oxidized to carbon dioxide and water. Our OE Therm/Cat unit operates using several types of burners depending on the process stream. High VOC Destruction levels, greater than 99.99, can beachieved with the OE burner. The OE Therm/Cat is compact and can easily be installed at contaminated soil site. When haloginated compounds are treated a scrubber and neutralization system is added.
|
