Index
Item					Page
Free Product Recovery					1
Ground water Recovery
	A. Pneumatic Pumps QED				1
	B. Submersible Pumps Grundfos 4" AND sq/sqe 3" Smart Pump				2
	C. Submersible Pumps Accessories				2
	D. Air Compressors				3
	E. Oxygen Generators				3
	F Pneumatic Pumps:  Clean Environment				4
Ground Water Treatment
	A. Air stripper Low Profile Stainless Steel				5
	B. Air Stripper Low Profile Polyethylene				6
	D. Air Strippers Low Profile Counter Current 30 gpm				7
	E. Air strippers  Low profile Counter Current 60 gpm				7
Separation Equipment
	A. Solid Removal/Filtration				8
	B,C,D. Oil Water Separators				9
Soil Vapor Extraction
	Positive Displacement Blower				10
	Regenerative Blowers				12
Multiphase Extraction Systems					13
Dual Phase Vacuum Extractions					15
Accessories For SVE, MPE and DPE					17
Thermal and Catalytic Oxidizers					18
Air Spargin
	A,B. Low Pressure				20
Air Sparging  High Pressure					21
Air Sparging Accessories					23
Heat Transfer
	Heat Exchangers				25
	Compressed Air Dryers				25
Control Panels					26
Autodialer					28
Enclosed Buildings
	A. Wood Exterior,  B. Metal, Containers				29
	D. Trailers				29
	E.Building /Trailer Accessories				30
Deposit Control Agents					31
Tanks					32
Carbon Treatment
	Carbon Liquid and Vapor Phase				33
Rentals					35
Q & A Sheets					37
Technical References					Appendix
1. FREE PRODUCT RECOVERY
A.	In-Well Separators
	Standard Features:
	- Pump	- Filter/regulator		- 25 ft of downwell tubing
	- Well cap	- Exhaust valve		- Surface controller
				Ferret Pumps		BACK TO TOP
	PART	MFG	DIA.	DESCRIPTION
	NO.		(in)
	FE1	QED	2	Standard Ferret In-Well Separator
	FE2	QED	2	Standard Ferret w/ 12" Floating Inlet
	FE3	QED	4	High Capacity Ferret In-Well Separator
	FE4	QED	4	High Capacity Ferret w/12" Floating Inlet
B.	Free Product Recovery Packages
	Includes all Ferret standard features plus the following:
	- Compressor		- Hand pump
	- Tank-full shutoff
	PART	MFG	DIA.	DESCRIPTION
	NO.		(in)
	FE5	QED	2	Standard Ferret Recovery Package
	FE6	QED	4	Standard Ferret Recovery Package
	FE7	QED	*	Ferret Hand Positioning Pump
	*Not applicable
2. GROUNDWATER RECOVERY
A.	Pneumatic Controller-less Pumps
	Standard Features:
	- pump	- well cap	- filter/regulator
	- 50 ft. of downwell tubing				BACK TO TOP
				Hammerhead Pumps
	PART	MFG	DIA.	DESCRIPTION
	NO.		(in)
	SP1	QED	4	Half-Length Solo II Pump
	SP2	QED	4	Full-Length Solo II Pump
	HH1	QED	2	S.S. Hammerhead Pump (2.5 gpm)
	HH2	QED	4	Brass/S.S. Hammerhead Pump (15 gpm)
	HH3	QED	4	S.S. Hammerhead Pump (15 gpm)
2. GROUNDWATER RECOVERY (cont'd)
B.	Electric Submersible Pumps
	Standard Features:
	- Grundfos submersible pump or equal
	PART	MFG	HP	DESCRIPTION
	NO.
				Grundfos 5E Series or equal	Grundfos Pumps
	ESP1	GRUN	1/3	5E5
	ESP2	GRUN	1/3	5E8
	ESP3	GRUN	1/2	5E12
	ESP4	GRUN	3/4	5E17
				Grundfos 10E Series or equal
	ESP5	GRUN	1/3	10E5
	ESP6	GRUN	1/2	10E8
	ESP7	GRUN	3/4	10E11
	ESP8	GRUN	1	10E14
				Grundfos 16E Series or equal
	PART	MFG	HP	DESCRIPTION
	NO.
	ESP9	GRUN	1/2	16E4
	ESP10	GRUN	3/4	16E7
	ESP11	GRUN	1	16E9
				Grundfos 25E Series or equal
	ESP12	GRUN	1/2	25E3
	ESP13	GRUN	3/4	25E4
	ESP14	GRUN	1	25E6
					BACK TO TOP
	- Grundfos submersible pump or equal
	3" SMART PUMP
	PART	MFG	HP	DESCRIPTION
	NO.
				Grundfos SQ/SQE 5 Series or equal
		GRUN	1/3	5SQ03A 90
		GRUN	1/3	5SQ03-140
		GRUN	1/2	5SQ5-120
		GRUN	3/4	5SQ07-320
				Grundfos SQ/SQE10 Series or equal
		GRUN	1/3	10SQ03-110
		GRUN	1/2	10SQ05-160
		GRUN	1	10SQ10-240
		GRUN	1	10SQ10-330
				GrundfosSQ/SQE 15 Series or equal
		MFG	HP	DESCRIPTION
		GRUN	1/2	15SQO3-70
		GRUN	3/4	15-SQ05-110
		GRUN	1	15SQ10-220
				Grundfos SQ/SQE 30 Series or equal
		GRUN	1/2	30SQ05-40
		GRUN	1	30SQ05-90
		GRUN	1	30SQ10-130
					BACK TO TOP
C.	Submersible Pump Accessories
	PART	MODEL	FT	DESCRIPTION
	NO.
				Conductivity Probes
	CON1		25	Sets of Conductivity Probes (3 per set)
	CON2		50
	CON3		75
	CON4		100
				Pump Cable
	CAB1		25	Steel Cable to Support Pump (1/8")
	CAB2		50
	CAB3		75
	CAB4		100
				Discharge Hose
	HOS1		25	Petroleum Resistant Pump Discharge Hose
	HOS2		50	(w/ Kamlock Fittings)
	HOS3		75
	HOS4		100
				Motor Lead
	MTL1		25	Additional Pump Motor Lead (after 25 ft)
	MTL2		50
	MTL3		75
	MTL4		100
2. GROUNDWATER RECOVERY (cont'd)
					BACK TO TOP
D.	Reciprocating Air Compressors (for pneumatic pumps)
	Standard Features:
	-  Motor		-Motor Starter
	- Receiver tank		- Pressure Switch
	- Belt guard		-Pressure gage
	PART	MODEL	HP	DESCRIPTION
	NO.
		CV907	2	StarterNEMA1 / ODP motor/ 60 gl rec.tank
		CV907T	2	StarterNEMA 4 /TEFC motor/60 gl rec tank
		CV969	5	StarterNEMA1 / ODP motor/ 80 gl rec.tank
		CV969T	5	StarterNEMA 4 /TEFC motor/80 gl rec tank
		CV9610	7.5	StarterNEMA1 / ODP motor/ 80 gl rec.tank
		CV9610T	7.5	StarterNEMA 4 /TEFC motor/80 gl rec tank
		CV9711	10	StarterNEMA1 / ODP motor/ 80 gl rec.tank
		CV9711T	10	StarterNEMA 4 /TEFC motor/120 gl rec tank
		CV9712	15	StarterNEMA1 / ODP motor/ 120 gl rec.tank
		CV9712T	15	StarterNEMA 4 /TEFC motor/80 gl rec tank
					BACK TO TOP
	PART	MODEL		DESCRIPTION
	NO.
	SOL1			3-way solenoid valve
			Reciprocating Compressor
2. GROUNDWATER RECOVERY (cont'd)
E.	Clean Environment Pumps
		AP-2 AutoPump®
	AP-201	AP-2/TL-s		Stainless Steel SS Barb top load
	AP-202	AP-2/TL-l		Stainless Steel SS Barb top load
	AP-203	AP-2/BL-S		Stainless Steel SS Barb Bottom load
	AP-204	AP-2/BL-L		Stainless Steel SS Barb Bottom load
		AP-3 AutoPump®
	AP-301	AP-3/TL-S		Fiberglass Brass barb top load
	AP302	AP-3/TL-L		Fiberglass Brass barb top load
	AP-303	AP-3/BL-S		Fiberglass Brass barb bottom load
	AP-304	AP-3/BL-L		Fiberglass Brass barb bottom load
		AP-4 Auto Pump®
	AP-401	AP-4/TL-LD		Fiberglass Brass barb top load
	AP-402	AP-4/TL-S		Fiberglass Brass barb top load
	AP-403	AP-4/TL-L		Fiberglass Brass barb top load
	AP-404	AP-4/BL-LD		Fiberglass Brass barb Radial load
	AP-405	AP-4/BL-S		Fiberglass Brass barb bottom load
	AP-406	AP-4/BL-L		Fiberglass Brass barb bottom load
					BACK TO TOP
	PART	ITEM		DESCRIPTION
				AP-2 Plumbing & Hardware
	AP-205	Fluid Discharge		5/8" OD Nylon Tubing**  add$2.50 +1.12ft
	AP-206	Pump Air Supply		3/8" OD Nylon Tubing** add $1.60 + 0.65 ft
	AP-207	Pump Air Exhaust		1/2" OD Nylon Tubing**$2.00 = 0.90 ft
	AP-208	Support Rope		1/4" Well Line with Q-Link add $12 +0.35 ft
	AP-209	Filter/Regulator •		Model FR-35 w/brass barbs
	AP-210	Well Cap†		2" Slip Cap
	AP-211	Cycle Counter		with Barbs
				AP-3 & AP-4 Plumbing & Hardware
	AP-306	Fluid Discharge		1" OD Nylon Tubing**  add $10.00 +2.65 ft
	AP-307	Pump Air Supply		1/2" OD Nylon Tubing**$2.00 = 0.90 ft
	AP-308	Pump Air Exhaust		5/8" OD Nylon Tubing**$2.50 +1.12ft
	AP-309	Support Rope		3/8" Well Line with Q-Link add $12 +0.35 ft
	AP-310	Filter/Regulator •		Model FR-35 w/brass barbs
	AP-311	Well Cap†		4" Slip Cap
	AP-312	Cycle Counter		with Barbs
					BACK TO TOP
		AP-3 Family		AP-4 family
3. GROUNDWATER TREATMENT
A.	Low Profile Air Strippers (Stainless Steel)
	Standard Features:
	- Stainless steel trays			- Low air pressure switch
	- Blower			- Sump high/high level switch
	- Metal skid			- Interconnect piping
	PART	MOTOR	HP	DESCRIPTION
	NO.	TYPE
	AS1	TEFC	5	EZ4.4SS
	AS2	EXP	5	Low Profile Air Stripper
	AS3	TEFC	5
	AS4	EXP	5
	AS5	TEFC	5	EZ4.6SS
	AS6	EXP	5
	AS7	TEFC	5
	AS8	EXP	5
	AS9	TEFC	5	EZ6.4SS
	AS10	EXP	5
	AS11	TEFC	5
	AS-12	EXP	5
	AS13	TEFC	5	EZ6.6SS
	AS14	EXP	5
	AS15	TEFC	5
	AS16	EXP	5
	AS17	TEFC	5	EZ8.4SS
	AS18	EXP	5
	AS19	TEFC	5
	AS-20	EXP	5
	AS21	TEFC	5	EZ8.6SS
	AS22	EXP	5
	AS23	TEFC	5
	AS24	EXP	5
	AS25	TEFC	7.5	EZ12.4SS
	AS26	TEFC	7.5
	AS27	EXP	7.5
	AS28	TEFC	7.5	EZ12.6SS
	AS29	TEFC	7.5
	AS30	EXP	7.5
	AS31	TEFC	7.5	EZ16.4SS
	AS32	TEFC	7.5
	AS33	EXP	7.5
	AS34	TEFC	7.5	EZ16.6SS
	AS35	TEFC	7.5
	AS36	EXP	7.5
	AS37	TEFC	15	EZ24.4SS
	AS38	EXP	15
	AS39	TEFC	15	EZ24.6SS
	AS40	EXP	15
B.	Low Profile Air Strippers ( Polyethylene)
	Standard Features:
	- Molded polyethylene trays			- Low air pressure switch (EXP)
	- Blower			- Sump high/high level switch
	- Metal skid			- Interconnect piping	BACK TO TOP
	PART	MOTOR	HP	DESCRIPTION
	NO.	TYPE
	ASP1	TEFC	2	EZ2.4P
	ASP2	EXP	2
	ASP3	TEFC	2	EZ-Stripper
	ASP4	EXP	2
	ASP5	TEFC	2	EZ2.6P
	ASP6	EXP	2
	ASP7	TEFC	2
	ASP8	EXP	2
	ASP9	TEFC	3	EZ4.4P
	ASP10	EXP	3
	ASP11	TEFC	3
	ASP12	EXP	3
	ASP13	TEFC	3	EZ4.6P
	ASP14	EXP	3
	ASP15	TEFC	3
	ASP16	EXP	3
C.	Accessories for Low Profile Air Strippers
	Transfer Pump Packages: Can be used as feed and/or discharge pumps and include the following:
	- Centrifugal pump			- Plumbing connections
	- Level switch				BACK TO TOP
	PART	MOTOR	HP	DESCRIPTION
	NO.	TYPE
	FP1	TEFC	1/2	50 TDH TP Package
	FP2	EXP	1/2	50 TDH TP Package
	FP3	TEFC	1	50 TDH TP Package
	FP4	EXP	1	50 TDH TP Package
	FP5	TEFC	2	100 TDH Pump Package
	FP6	EXP	2	100 TDH Pump Package
	FP7	TEFC	1.5	50 TDH TP Package
	FP8	EXP	1.5	50 TDH TP Package
	FP9	TEFC	2	50 TDH TP Package
	FP10	EXP	2	50 TDH TP Package
				Totalizing Flow Meters
	MF1		3/4	Mechanical Flow meter
	MF2		1
	MF3		1.5
	MF4		2
					BACK TO TOP
C	Accessories for Low Profile Air Strippers continued
	PART	MOTOR	HP	DESCRIPTION
	NO.	TYPE
	DM1			Digital Flow meter
	DM2
	DM3
				Miscellaneous Items
	MS1			High Level Sensor (Loose)
	MS2			Pump On/Off Switch (Loose)
	AC2			EZ-SAMP Sample Port
	AC3			EZ-BLSIL4 Blower Silencer
	AC4			EZ-BLSIL6 Blower Silencer
	AC5			EZ-BLSIL8 Blower Silencer
	AC6			EZ-AIRFLOW4" Pitot Tube w/Gauge
	AC7			EZ-AIRFLOW6" Pitot Tube w/Gauge
	AC8			EZ-AIRFLOW8" Pitot Tube w/Gauge
D.	Counter Current Cascade Strippers
	Standard Features: 0-20gpm
	- Tray stripper w / polyethylene construction
	-30 gallon sump
	- Sight tube
	- Four trays
	Note: Standard motors are 230/460 VAC, 3 Ph Class 1Div 2,Group D
	PART		HP	DESCRIPTION
	NO.	TYPE
	LPII	Air stripper		LPII 0-20 gpm-4 Tray
	LPIIop1	Blower		1hp230V, 3/60 Blower
	LPIIop2	Blower		2hp 230V. 3 phase
	LPIIop3	Blower		3hp 230V. 3 phase
	LPIIop4	Blower		4hp 230V. 3 phase	Lo-Prow III
	LPIIop5	Tray		Additional trays  (Max eight trays)
	LPIIop6	Pump		Transfer pump 1/2 HP XP motor
	LPIIop7	Controls		Transfer pump controls
	LPII op8	Flow		Air flow meter
	LPII op9	Flow		Water flow totalizer
					BACK TO TOP
E.	Standard Features: 0-60gpm
	- Tray stripper w / polyethylene construction
	-240 gallon sump
	- Sight tube
	- Three trays
	- Blower with 10 HP TEFC motors 230/460 VAC, 3 Ph Class 1Div 2,Group D
	NO	Type		Description
	LPIII	Air stripper		LPII 0-20 gpm-4 Tray
	LPIIIop1	Pump		1hp230V, 3/60 Blower
	LPIIIop2	Tray		Trays up to 5
	LPIIIop3	Controls		Transfer pump controls
4.  SEPARATION EQUIPMENT
A.	Solids Settling / Filtration
	PART	MODEL	DIA.	DESCRIPTION
	NO.		(IN)
				Bag Filters
	FBFN1	BFN 12-		FSI Bag Filter w/Carbon Steel Housing, or Equal
		CS-2-750-2		One (1) box of 100 filter bags	BFN Series
				(specify 5,10,15,25,75, or 100 Micron)
				Legs, ball valves, pressure gauge
	F1X100B			as above in polypropylene
	MX	MX100		Poly
B.	Oil/Water Separators w/ Integral Transfer Tanks - Stainless steel
	PART	MODEL		DESCRIPTION
	NO.				MX100
	AGM	AGM-2SS70		Oil/Water Separator w/ integral transfer tank
	AGM	AGM-3SS90
				Accessories
	OSMFL1	OSMFL1		Mounting Flange
	OSMST1	OSMST1		O/W Sep. Stand, 3 ft. height
C.	Oil/Water Separators - Steel Construction				BACK TO TOP
	PART	MODEL		DESCRIPTION
	NO.
	OSSEP1	AGM2SS		OWS-15-S
	0S'SEP2	AGM3SS		OWS-30-S
	OSSEP3	AGM3.5SS		OWS-50-S
	OS'SEP4	AGM4SS		OWS-100-S
				Accessories
	OSSEP5	AGM2 STAND		O/W Sep. Stand for OWS-15-S
	OSSEP6	AGM3 STAND		O/W Sep. Stand for OWS-30-S
	Oil water Separator with Sump			Stainless Steel Separator
4.  SEPARATION EQUIPMENT continued					BACK TO TOP
D.	Separators - Stainless Steel Construction
	PART	MODEL	FLOW	DESCRIPTION
	NO.		(gpm)
				EconoSep
	AGS-1SS	AGS-1SS	2-5	Oil Coalescing Oil/Water Separator
	AGS-2SS	AGS-2SS	4-10
	AGM-2SS	AGM-2SS	8-20
				TotalSep
	AGS-2SS	AGS-2SS	2-5	Oil Coalescing Oil/Water Separator
	AGM-2SS	AGM-2SS	4-10
	AGM2SSIH	AGM2SSIH	8-20
	AGM355IH	AGM355IH	15-30
	AG3-SS	AG3-SS	25-40
	AG4-SS	AG4-SS	35-75
	AG4.5IH	AG4.5IH	60-125
				Accessories
	AGT	AGTUBE		External Flexible Transfer Tube
	AGSITE	AGSITE		Rigid External Sight Tube
	AGLEG	AGLEG-18		18" Separator Stand
	AGLEG	AGLEG-36		36" Separator Stand
E.	Oil-Water Separator Fiberglass Construction				BACK TO TOP
	PART	MODEL	FLOW	DESCRIPTION
	NO.		(gpm)
				EconoSep
	OWS1	ES002	2-5	Oil Coalescing Oil/Water Separator
	OWS2	ES004	4-10
	OWS3	ES008	8-20
				TotalSep
	OWS4	TS002	2-5	Oil Coalescing Oil/Water Separator
	OWS5	TS004	4-10
	OWS6	TS008	8-20
	OWS7	TS012	15-30
	OWS8	TS016	25-40
	OWS9	TS024	35-75
	OWS10	TS036	60-125	Hydro-floSeparator
				Accessories
	OWS11			External Flexible Transfer Tube
	OWS12			Rigid External Sight Tube
	OWS13			Mounting Flange
	OWS14			18" Separator Stand
	OWS15			36" Separator Stand
F.	Switches				BACK TO TOP
	PART	MODEL		DESCRIPTION
	NO.
	AGHLP	AGHLP		High Level Switch (Non-XP)
	AGLLB	AGHLPXP		High Level Switch (XP)
	AGLC			Pump On/Off Switch
5. SOIL VAPOR EXTRACTION (utilizing Positive Displacement Blowers)
A.	Basic SVE Packages
	Standard Features:
	- Steel base with forklift tubes
	- Cyclonic 80 nominal gallon carbon steel knockout tank w/ 6" cleanout
	site gauge, and drain valve.
	- Inlet vacuum gauge and sample port				BACK TO TOP
	- Inline filter
	- Vacuum relief valve
	- Belt Driven PD  Blower
	- Premium combination chamber-absorptive discharge silencer
	*Core SVE unit based on process pipe size.  Add A & B together to get system price.				Sutorbilt
	PART	MODEL	DIA.	DESCRIPTION
	NO.		(in)
	SVE1		1-2.5	Basic SVE Package
	SVE2		3
	SVE3		4
	SVE4		6
				Optional Items
	SVE5			Adder for 117 gallon separator
					BACK TO TOP
B.	Blower Selection
	Kaeser
	PART	MODEL	DIA.	DESCRIPTION
	NO.		INL.	(Flow/ Horsepower / Maximum Vacuum)
				Blower Selection (for PD SVE Systems)
	PD1	2LVP	2-S	64-168 SCFM / 1-7.5 HP / 14" Hg
	PD2	3LVP	2.5-S	108-350 SCFM / 1-10 HP / 14" Hg
	PD3	4LVP	3-S	197-579 SCFM / 2-15 HP / 14" Hg
	PD4	5LVP	4-S	387-953 SCFM / 5-40 HP / 14" Hg
	PD5	6LVP	6-S	614-1614 SCFM / 7.5-60 HP / 14"Hg
	PD6	2MVP	1-S	30-60 SCFM / 1-5 HP / 15" Hg
	PD7	3MVP	2-S	70-150 SCFM / 3-10 HP / 15" Hg
	PD8	4MVP	2.5-S	140-350 SCFM / 5-20 HP / 16" Hg
	PD9	5MVP	4-S	210-540 SCFM / 7.5-25 HP / 16" Hg
	PD10	6MVP	5-S	270-815 SCFM / 10-40 HP / 16" Hg
	PD11	7MVP	6-F	600-1383 SCFM / 15-60 HP / 16" Hg
	PD12	3HVP	1.25-S	40-138 SCFM / 3-7.5 HP / 16" Hg	BACK TO TOP
	PD13	4HVP	1.5-S	72-218 SCFM / 3-10 HP / 16" Hg
	PD14	5HVP	2.5-S	134-359 SCFM / 5-20 HP / 16" Hg
	PD15	6HVP	3-S	152-477 SCFM / 7.5-25 HP / 16" Hg
	PD16	7HVP	4-S	278-682 SCFM / 10-40 HP / 16" Hg
	PD17	8HVP	4-S	40-138 SCFM / 3-7.5 HP / 16" Hg
5. SOIL VAPOR EXTRACTION-PD BLOWERS(cont'd)
C.	Motors
				Motor Selection ( for PD SVE Systems)
	Standard Motors 3 phase 1800 RPM.  TEFC are assumed Class 1 Div 2
	PART	MOTOR	HP	DESCRIPTION
	NO.	TYPE
	PDM0.2	TEFC	2	PD Blower Motor  145T
	PDM 0.4	XP	2
	PDM 0.6	XP	2
	PDM1	TEFC	3	PD Blower Motor  182T
	PDM2	TEFC	3	PD Blower Motor 182T
	PDM3	EXP	3
	PDM4	EXP	3
	PDM5	TEFC	5	PD Blower Motor 184T
	PDM6	EXP
	PDM7	TEFC	5	PD Blower Motor  184T
	PDM8	EXP
	PDM9	TEFC	7.5	PD Blower Motor  213T
	PDM10	EXP
	PDM11	TEFC	10	PD Blower Motor  215T
	PDM12	EXP
	PDM13	TEFC	15	PD Blower Motor  254T
	PDM14	EXP
	PDM15	TEFC	20	PD Blower Motor  256T
	PDM16	EXP
	PDM17	TEFC	25	PD Blower Motor  284T
	PDM18	EXP
	PDM19	TEFC	30	PD Blower Motor  286T
	PDM20	EXP
	PDM21	TEFC	40	PD Blower Motor  324T
	PDM22	EXP
	PDM23	TEFC	50	PD Blower Motor  326T
	PDM24	EXP
					BACK TO TOP
D.	Variable Frequency Drives (for RPM control) GPD 505/P5 BASIC DRIVE
	PART	MODEL	HP	DESCRIPTION
	NO.			(Voltage)
	VFD1	FW-174457	2	200-230 VAC Variable Frequency Drive
	VFD2	FW-174458	3
	VFD3	FW-174446	5
	VFD4	FW-174438	7.5
	VFD5	FW-174439	10
	VFD6	FW-174557	15
	VFD7	FW-174560	20
	VFD8	FW-174569	25
	VFD9	FW-174571	30
	VFD10	FW-174567	40	460-480 VAC Variable Frequency Drive
	VFD11	FW-174593	50
6. SOIL VAPOR EXTRACTION (utilizing Regenerative Blowers)
A.	Basic SVE Package
	Standard Features:
	- Steel base with fork lift able
	- Cyclonic 80 nominal gallon carbon steel knockout tank w/ 6" cleanout
	site gauge, and drain valve.
	- Inlet vacuum gauge and sample port
	- Inline filter
	- Fully adjustable vacuum relief valve
	- Direct Drive Regenerative Blower
	*Core SVE unit based on process pipe size .  Add A to B to get system pricing			Rotron Regenerative Blower
	PART	MODEL	DIA.	DESCRIPTION
	NO.		(in)
	SVE1		1-2.5	Basic SVE Package
	SVE2		3
	SVE3		4
	SVE4		6
				Optional Items
	SVE5			Adder for 117 gallon separator
B.	Regenerative Blowers / Motors
	PART	MODEL	HP	DESCRIPTION
	NO.			(Flow, Max. Vac.,Type, Voltage, Frequency)
				Blower / Motor Selection ( for Regen. SVE Systems)
	REG-0.5	EN454W58ML	1.5	127SCFM 59 IWG, XP, 115/230 VAC, 50/60Hz
	REG1	EN505AX58ML	2	160 SCFM, 60 IWG, XP, 115/230 VAC, 50/60 Hz
	REG2	EN505AX72ML		160 SCFM, 60 IWG, XP, 115/230 VAC, 50/60 Hz
	REG3	EN505CJ5ML	2.5	160 SCFM, 60 IWG, XP, 230 VAC, 50/60 Hz	BACK TO TOP
	REG4	EN606M5ML	3	200 SCFM, 75 IWG, XP, 208-230 VAC, 50/60 Hz
	REG5	EN606M72L		200 SCFM, 75 IWG, XP, 208-230/460 VAC, 50/60 Hz
	REG6	EN6F5L	5	225 SCFM, 85 IWG, XP, 230 VAC, 50/60 Hz
	REG7	EN6F72L		225 SCFM, 85 IWG, XP, 230/460 VAC, 50/60 Hz
	REG8	EN707FL5		295 SCFM, 85 IWG, XP, 230/460 VAC, 50/60 Hz
	REG9	EN707FL5	5.5	295 SCFM, 85 IWG, XP, 230 VAC, 50/60 Hz
	REG10	EN808FL5		345 SCFM, 64 IWG, XP, 230 VAC, 50/60 Hz
	REG11	EN808BA72	7.5	350 SCFM, 97 IWG, XP, 230/460 VAC, 50/60 Hz
	REG12	EN858BD72	10	400 SCFM, 98 IWG, XP, 230/460 VAC, 50/60 Hz
	REG13	EN909BG72	15	600 SCFM, 100 IWG, XP, 230/460 VAC, 50/60 Hz
	REG14	EN14BU72	29	920 SCFM, 80 IWG, XP, 230/460 VAC, 50/60 Hz
	REG15	EN909BG72	15	920 SCFM, 110 IWG, XP, 230/460 VAC, 50/60 Hz
					BACK TO TOP
	Turbotron blowers Call for systems and designs
				Turbotron system
7.  MULTIPHASE EXTRACTION SYSTEMS
A.	Pre-Separator Packages w/ Transfer Pumps (for Water or Oil Sealed Systems)
	Standard Features:
	- Carbon steel tank (80 or 120-gallon nominal capacity)
	- Skid-mounted staged centrifugal
	or progressive cavity pump
	PART	MOTOR	Q	DESCRIPTION
	NO.	TYPE	(gpm)
				Pre-Separator with Staged Centrifugal Pump
	PS1	TEFC	7.5	PS-7.5 Pre-Separator w/ 1/2 HP Pump
	PS2	EXP
	PS3	TEFC	7.5	PS-7.5 w/ 1/2 HP Pump
	PS4	EXP
	PS5	TEFC	20	PS-20 w/ 1/2 HP Pump
	PS6	EXP
	PS7	TEFC	30	PS-30 w/ 3/4 HP Pump
	PS8	EXP
	PS9	TEFC	40	PS-40 w/ 3/4 HP Pump
	PS10	EXP
	PS11	TEFC	60	PS-60 w/ 5 HP Pump
	PS12	EXP
				Pre-Separator with Progressive Cavity Pump
	PS13	TEFC	7.5	PS-7.5M Pre-Separator w/ 1/2 HP Pump
	PS14	EXP
	PS15	TEFC	7.5	PS-7.5M w/ 1/2 HP Pump
	PS16	EXP
	PS17	TEFC	20	PS-20M w/ 3/4 HP Pump
	PS18	EXP
	PS19	TEFC	30	PS-30M w/ 1 HP Pump
	PS20	EXP
	PS21	TEFC	40	PS-40M w/ 1.5 HP Pump
	PS22	EXP
	PS23	TEFC	60	PS-60M w/ 3 HP Pump
	PS24	EXP
B.	Water Sealed Liquid Ring Pump Systems
	Standard Features:
	- Self contained LRP
	- Built in Seal water tank
	- Heat Exchanger
	- Seal water recirculation system			Water Sealed Liquid Ring Pump
	PART	MOTOR	HP	DESCRIPTION
	NO.	TYPE		Max Air Flow  ACFM	BACK TO TOP
	2BLL1101	TEFC	5	60 ACFM
	2BL1251	TEFC	7.5	110 ACFM
	2BL1281	TEFC	10	140 ACFM
	2BL1341	TEFC	15	180 ACFM
C.	Oil Sealed Liquid Ring Pump Systems
	Standard Features:
	- Skid -mounted LRP
	- Seal oil tank
	- Low oil switch
	- Seal oil temp. switch and gauge
	- 5 Stage Oil coalescing system
				VMAX 300
	PART	MOTOR	HP	DESCRIPTION
	NO.	TYPE		NOMINAL Air Flow  ACFM
	VMAX080	TEFC	5	75 ACFM
	VMAX0082	EXP
	VMAX0100	TEFC	7.5	100 ACFM
	VMAX0102	EXP
	VMAX0150	TEFC	10	150 ACFM
	VMAX0152	EXP
	VMAX0200	TEFC	15	200 ACFM
	VMAX0202	EXP
	VMAX0300	TEFC	20	285 ACFM
	VMAX0302	EXP
	VMAX0450	TEFC	25	450 ACFM
	VMAX0452	EXP
	VMAX0550	TEFC	40	550 ACFM
	VMAX552	EXP
	VMAX0650	TEFC	40	650 ACFM
	VMAX0652	EXP
	VMAX0750	TEFC	50	750 ACFM
	VMAX0752	EXP
	VMAX1000	TEFC	60	1000 ACFM
	VMAX1002	EXP
	VMAX1100	TEFC	75	1100 ACFM
	VMAX1102	EXP
	VMAX1200	TEFC	100	1200 ACFM
	VMAX1202	EXP
8. DUAL VACUUM EXTRACTION
A.	Oil Sealed Liquid Ring Pump Systems(using Dekker VMAX, Covac Sliding Vane Pump or equal)
	Standard Features:
	- Dekker VMAX Oil Sealed LRP or Covac Direct Drive Air Center
	- Direct Drive Flanged Motor Mount*
	- Proprietary DX-5 Five Stage Air/Oil Separator*
	- VMAX 10,000-hr Seal Fluid*
	- TEFC or EXP motor
	- Low seal fluid Switch*
	- High seal fluid temperature switch*
	- Three Year Warranty
	- 117 nominal gallon cyclonic carbon steel separator w/internal demister pad,
	6'' cleanout, site gauge, and drain valve.
	- 10 Micron inlet filter with differential pressure gauges (Built-in 5 Micron inlet filter
	on Covac systems)				VMAX 450
	- High eff. Air cooled heat exchanger with high flow cooling fan*
	PART	MOTOR	HP	DESCRIPTION
	NO.	TYPE		Nominal Air Flow Rate / Max. Vacuum
				Dekker LRP/Motor Selection
	DPE1	TEFC	5	80 ACFM / 29" HG
	DPE2	EXP
	DPE3	TEFC	7.5	100 ACFM / 29" HG
	DPE4	EXP
	DPE5	TEFC	10	150 ACFM / 29" HG	BACK TO TOP
	DPE6	EXP
	DPE7	TEFC	15	200 ACFM / 29" HG
	DPE8	EXP
	DPE9	TEFC	20	300 ACFM / 29" HG
	DPE10	EXP
	DPE11	TEFC	25	450 ACFM / 29" HG
	DPE12	EXP
	DPE13	TEFC	40	550 ACFM / 29" HG
	DPE14	EXP
	DPE15	TEFC	40	650 ACFM / 29" HG
	DPE16	EXP
	DPE17	TEFC	50	750 ACFM / 29" HG
	DPE18	EXP
	DPE19	TEFC	60	1000 ACFM / 27.5" HG
	DPE20	EXP
	DPE21	TEFC	75	1100 ACFM / 27.5" HG
	DPE22	EXP
	DPE23	TEFC	100	1200 ACFM / 27.5" HG
	DPE24	EXP
				Claw Pump/Motor Selection
	DPE25	TEFC	10	MM 1104 43 ACFM / 28.4"HG
	DPE26	EXP
	DPE27	TEFC	15	MM1144 58 ACFM / 28.4"HG
	DPE28	EXP
	DPE29	TEFC	25	MM1102 86 ACFM / 28.4"HG
	DPE30	EXP
	DPE31	TEFC	10	mm1104 43 ACFM / 28.4"HG
	DPE32	EXP
	DPE33	TEFC	15	MM1142 117 ACFM / 28.4"HG
	DPE34	EXP
	DPE35	TEFC	25	MM1252 177 ACFM / 28.4"HG
	DPE36	EXP
	DPE37	TEFC	15	MM1132 227 ACFM / 28.4"HG
	DPE38	EXP
	DPE39	TEFC	25	MM1502 376 ACFM / 23.4"HG
	DPE40	EXP
					BUSCH Pumps
9. ACCESSORIES FOR SVE, MPE, AND DVE SYSTEMS
	PART	MODEL	DIA	DESCRIPTION
	NO.		(IN)
				Separator Tank Pump Out Systems	BACK TO TOP
	ADP1			1/2 HP TEFC Cent. Pump w/ 2 XP Float Switches
	ADP2			1/2 HP EXP Cent. Pump w/ 2 XP Float Switches
	ADP3			3/4 HP TEFC Prog. Cavity Pump w/ 2 XP Float Sw.
	ADP4			3/4 HP EXP Prog. Cavity Pump w/ 2 XP Float Sw.
	ADP5			1 HP TEFC Prog. Cavity Pump w/ 2 XP Float Sw.
	ADP6			1 HP EXP Prog. Cavity Pump w/ 2 XP Float Sw.
	ADP7			1 1/2 HP TEFC Prog. Cavity Pump w/2 XP Float Sw.
	ADP8			1 1/2 HP EXP Prog. Cavity Pump w/2 XP Float Sw.
	ADP9			3 HP TEFC Prog. Cavity Pump w/2 XP Float Sw.
	ADP10			3 HP EXP Prog. Cavity Pump w/2 XP Float Sw.
				Optional Switches
	VSW1			Vacuum Switch (Intrinsically Safe)
	TEM1			Temperature Gauge / Switch (Remote Bulb)
	XPF1			EXP Flow or Float Switch
	PART	MODEL	DIA	DESCRIPTION
	NO.		(IN)
				Valves
	BFV1		2	PVC Butterfly Valve
	BFV2		4
	BFV3		6
	SOL1		2	NEMA 4 Solenoid Valve
	SOL2		4
	MCV1		4	NEMA 4 Motorized Valves
	MCV2		6
	XPV1		2	NEMA 7 Solenoid Valve
	MCV3		4	NEMA 7  Motorized Valves
	MCV4		6
				Suction Side Carbon Plumbing
	ACM1		2	PVC Tee & 3 Slide Valves for Pulling through GAC
	ACM2		4
	ACM3		6
				Piping Kit for Connecting Carbon in Series
	GAC1		2	3-10' Hoses / 2-Pressure or Vacuum Gauges,
	GAC2		3	and 2-Sample Ports per Kit
	GAC3		4
				Air Flow Meters
	VFM1		2	Venturi Meters
	VFM2		3
	VFM3		4
	ERD1		2	ERDCO Direct Reading
	ERD2		3
	ERD3		4
	ERD4		6
	PTF1			Averaging Pitot Tube w/ Magnehelic Gauge
					BACK TO TOP
	PART	MODEL	DIA	DESCRIPTION
	NO.		(IN)
				Air Flow Meters
	MF1		3/4	Mechanical Flow meter
	MF2		1
	MF3		1.5
	MF4		2
	Ametek1		2	Ametek Direct Read 6-225  scfm
	Ametek2		3	Ametek Direct Read 50-475  scfm
	Amtek3		4	Ametek Direct Read 90-850 cfm
				Gauges
	TMG1			0-300 F Temperature Gauge
	PVG1			0-100" w.c. Vacuum Gauge
	PSG1			0-30 psig Pressure Gauge
				Process Manifolds
	MAN1		2	2 Leg PVC Manif. w/ Ball Valves, Ports, Vac. Gauges
	MAN2			ea. Additional Leg
	MAN3		4
	MAN4			ea. Additional 4" Leg
		1500 cfm VES With 500 cfm Sparge in Sound Enclosure
10. THERMAL AND CATALYTIC OXIDIZERS
A.	Thermal Oxidizer Packages (Propane or Natural Gas Supplement)
	Standard Features:
	- Skid-mounted unit with Forklift pockets
	- 3/16 Steel reactor lined with refractory
	- Gas train and burner assembly & process Blower
	- Main control panel
	- Pre-Plumbed and wired
	-Entrainment Separator with sight glass and High level shut-off
	PART	MODEL		DESCRIPTION
	NO.
				Flow Range (SCFM)
	TOX1			100-200
	TOX2			200-300
	TOX3			300-400
	TOX4			400-500
	TOX5			500-600
	TOX6			600-800
	TOX7			800-900
	TOX8			800-900
	TOX9			900-1000
B.	High Efficiency Catalytic Oxidizer
	Standard Features:
	- 50% efficient heat exchanger
	- Skid-mounted unit with Forklift pockets
	-  Steel reactor and stack
	- Gas train and burner assembly
	- Main control panel
				OE 750 Thermox
	PART	MODEL		DESCRIPTION
	NO.
				Flow Range (SCFM)
	COX10			100-300
	COX11			500
	COX12			750
	COX13			1000
	COX14			1500
	COX15			2000
C	Electric Catalytic Oxidizer
	Standard Features:
	- Skid-mounted unit with Forklift pockets
	- Main control panel
	-  Electric Pre-heater
	PART	MODEL		DESCRIPTION
				Flow Range (SCFM)
	COX16			100-150
	COX17			200-300
10. THERMAL AND CATALYTIC OXIDIZERS (cont'd)
	Catalyst Modules ( for High Efficiency and Electric Catalytic Oxidizers)
	PART	MODEL	DRE	DESCRIPTION
	NO.		%
				Catalyst
	COX18		95	100-300 SCFM
	COX19		95	300-500 SCFM	BACK TO TOP
	COX20		95	500-750 SCFM
	COX21		95	750-1000 SCFM
	COX22		95	1000-1500 SCFM
	COX23		95	1500-2000 SCFM
D	Oxidizer Accessories
	PART	MODEL	DRE	DESCRIPTION
	NO.		%
	OXY1			6-Pen Chart Recorder
	OXY2			LEL Sensor for Thermal Units Only
	OXY3			SOUND PROOF ENCLOSURE
	OXY 4			AUTO DRAIN PUMP SYSTEM
	OXY5			AUTO Dilution
	OXY6			BLOWER BYPASS PIPING 100-300
	OXY7			BLOWER BYPASS PIPING 350-550
	0XY8			BLOWER BYPASS PIPING 600-100
	0XY9			TELECOMMUNICATION
				Dual Axle Trailers
	OXY3			All models (except High Efficiency units
				greater than 750 SCFM)
	OXY4			High Efficiency Units (750-1500 SCFM)
				Startup Assistance
	OXY5			2-day Factory Startup Assistance
11. AIR SPARGING - LOW PRESSURES
A.	Basic Air Sparging Packages
	Standard Features:
	- PD Blower or Rotary Vane Pump
	- TEFC or EXP motor
	- Steel base with forklift tubes
	- Discharge pressure and temperature gauge
	-  inlet filter
	- Premium combination chamber-absorptive type discharge silencer
	*Core air sparging system based on process pipe size			Sparge System
	PART	MODEL	DIA.	DESCRIPTION
	NO.		(in)
	AIP1		1	Basic Air Sparging Package
	AIP2		2
	AIP3		2.5
	AIP4		3
	AIP5		4
B.	Blower / Compressor Selection
	Positive Displacement Blowers
	PART	MODEL	DIA.	DESCRIPTION
	NO.		INL.	(Flow/ Horsepower / Maximum Pressure)
				Blower Selection (for PD Air Sparge Systems)
	PD1	2LVP	2-S	56-162 SCFM / 1-7.5 HP / 7 psig
	PD2	3LVP	2.5-S	120-341 SCFM / 1-15 HP / 7 psig
	PD3	4LVP	3-S	213-566 SCFM / 3-25 HP / 7psig
	PD4	5LVP	4-S	387-953 SCFM / 5-40 HP / 7 psig
	PD5	6LVP	6-S	614-1614 SCFM / 7.5-60 HP / 7 psig	BACK TO TOP
	PD6	2MVP	1-S	30-60 SCFM / 1-5 HP / 12 psig
	PD7	3MVP	2-S	70-150 SCFM / 3-10 HP / 12 psig
	PD8	4MVP	2.5-S	140-350 SCFM / 5-20 HP / 12 psig
	PD9	5MVP	4-S	210-540 SCFM / 7.5-25 HP / 12 psig
	PD10	6MVP	5-S	270-815 SCFM / 10-40 HP / 12 psig
	PD11	7MVP	6-F	600-1383 SCFM / 15-60 HP / 12 psig
	PD12	3HVP	1.25-S	40-138 SCFM / 3-7.5 HP / 15 psig
	PD13	4HVP	1.5-S	72-218 SCFM / 3-10 HP / 15 psig
	PD14	5HVP	2.5-S	134-359 SCFM / 5-20 HP / 15 psig
	PD15	6HVP	3-S	152-477 SCFM / 7.5-25 HP / 15 psig
	PD16	7HVP	4-S	278-682 SCFM / 10-40 HP / 15 psig
	PD17	8HVP	4-S	40-138 SCFM / 3-7.5 HP / 15 psig
11. AIR SPARGING - LOW PRESSURES (cont'd)
	Rotary Vane Compressors - Low Pressure (Gast, Rietschle, Becker, or equal)
	PART	MODEL	DIA.	DESCRIPTION
	NO.		INL.	(Manufacturer / Flow / Max. Pressure)
				Rotary Vane Pump Selection
	RVP1	2080	3/4	Gast / 18 SCFM / 15 psig
	RVP2	3080	3/4	Gast / 26 SCFM / 15 psig
	RVP3	6066	1	Gast / 42 SCFM / 20 psig
	RVP4	MM1104	0.75	Busch 1104 42cfm/23.5psig
	RVP5	DTA60	1	Busch 1144 58cfm/16 psig
	RVP6	DTA80	1	Busch 1102 86cfm/23.5 psig
	RVP7	DTA100	1.25	Busch 1122 100cfm/29.5 psig	Gast 6066
	RVP8	DTA140	1.25	Busch 1322 218cfm/31 psig
	RVP9	DLR400	4	Busch 1502 43cfm/29.2 psig
	RVP10	KDT3.60	1	Becker / 29 SCFM / 22 psig
	RVP11	KDT3.80	1	Becker / 38 SCFM / 22 psig
	RVP12	KDT3.100	1.5	Becker / 47 SCFM / 22 psig
	RVP13	KDT3.140	1.5	Becker / 80 SCFM / 22 psig
	RVP14	DTLF250	2.5	Becker / 160 SCFM / 25 psig
	RVP15	DTLF500	4	Becker / 325 SCFM / 25 psig	Busch
				Motor Selection ( for PD SVE Systems)	CLAW
	Standard Motors 3 phase 1800 RPM.  TEFC are assumed Class 1 Div 2
	PART	MOTOR	HP	DESCRIPTION
	NO.	TYPE
	PDM0.2	TEFC	2	PD Blower Motor  145T
	PDM 0.4	XP	2		BACK TO TOP
	PDM 0.6	XP	2
	PDM1	TEFC	3	PD Blower Motor  182T
	PDM2	TEFC	3	PD Blower Motor 182T
	PDM3	EXP	3
	PDM4	EXP	3
	PDM5	TEFC	5	PD Blower Motor 184T
	PDM6	EXP
	PDM7	TEFC	5	PD Blower Motor  184T
	PDM8	EXP
	PDM9	TEFC	7.5	PD Blower Motor  213T
	PDM10	EXP
	PDM11	TEFC	10	PD Blower Motor  215T
	PDM12	EXP
	PDM13	TEFC	15	PD Blower Motor  254T
	PDM14	EXP
	PDM15	TEFC	20	PD Blower Motor  256T
	PDM16	EXP
	PDM17	TEFC	25	PD Blower Motor  284T
	PDM18	EXP
	PDM19	TEFC	30	PD Blower Motor  286T
	PDM20	EXP
	PDM21	TEFC	40	PD Blower Motor  324T
	PDM22	EXP
	PDM23	TEFC	50	PD Blower Motor  326T
	PDM24	EXP
	PART	MODEL	HP	DESCRIPTION
	NO.			(Voltage)
C.			Variable Frequency Drive (for RPM Control)GPD 505/P5
	VFD1	FW-174457	2	200-230 VAC Variable Frequency Drive
	VFD2	FW-174458	3
	VFD3	FW-174446	5
	VFD4	FW-174438	7.5
	VFD5	FW-174439	10
	VFD6	FW-174557	15
	VFD7	FW-174560	20
	VFD8	FW-174569	25
	VFD9	FW-174571	30
	VFD10	FW-174567	40	460-480 VAC Variable Frequency Drive
	VFD11	FW-174593	50
12. AIR SPARGING - HIGH PRESSURES
A.	Rotary Screw Compressor Selection (Curtis-Toledo or equal)
	Standard Features:
	- TEFC 230 VAC Three Phase Motor
	- Nominal 80 or 120 gallon air receiver
	- Oil filter
	- Multi-stage oil separation unit
	- Safety valve
	- NEMA 4 control panel w/ starters, transformer, hour meter,
	HOA switch with timed shutdown, high temp. light, fan overload relay,
	thermostatic oil valve
				Curtis Rotary Screw
	PART	MODEL	DIA.	DESCRIPTION
	NO.		DISC.
				Flow @ 100 psig/ HP / Max. Pressure
	RS1	R/S5TA	1/2	18 CFM / 5 HP ODP  ONLY / 100 psig
	RS2	RS7TA	1/2	26 CFM / 7.5HP ODP ONLY / 100 psig
	RS3	RS10T	3/4	41 CFM / 10 HP / 125 psig
	RS4	RS15T	1	67 CFM / 15 HP / 125 psig
	RS5	RS20T	1	88 CFM / 20 HP / 125 psig
	RS6	RS25T	1	108 CFM / 25 HP / 125 psig
	RS7	RS30AT	1	125 CFM / 30 HP / 125 psig
	RS8	RS30T	1	140 CFM / 30 HP / 125 psig	BACK TO TOP
	RS9	RS40T	1.5	191 CFM / 40 HP / 125 psig
	RS10	RS50T	1.5	225 CFM / 50 HP / 125  psig
				Flow @ 40 psig/ HP / Max. Pressure
	RS11	RS10TALP	3/4	65 CFM / 10 HP / 50 psig
	RS12	RS10TLP	3/4	82 CFM / 10 HP / 50 psig
	RS13	RS15TLP	1	115 CFM / 15 HP / 50 psig
	RS14	RS20TLP	1	140 CFM / 20 HP / 50 psig
	RS15	RS25TLP	1	160 CFM / 25 HP / 50 psig
	RS16	RS30TLP	1	180 CFM / 30 HP / 50 psig
	RS17	RS40TLP	1.5	260 CFM / 40 HP / 50 psig
	RS18	RS50TLP	1.5	310 CFM / 50 HP / 50 psig
B.	Accessories for Rotary Screw Compressors
	PART	MODEL		DESCRIPTION
	NO.
				Compressor Enclosures
	RSC1			Cabinet for Rotary Screw Comp. (10-30 HP)
	RSC2			Cabinet for Rotary Screw Comp. (40-50 HP)
				Additional Sound Reduction
	SRC1			Sound Red. For Rotary Screw  (10-30 HP)
	SRC2			Sound Red. For Rotary Screw  (40-50 HP)
C.	Rotary Vane Compressors - High Pressures (Mattei, Becker or equal)
	Standard Features:
	- Direct drive TEFC motor
	- 100% duty cycle
	- Safety valve
	- High air temperature shutdown
	- High temperature shutdown switch w/ light
				Becker  Rotary                        Mattei 505ERC
	PART	MODEL	HP	DESCRIPTION
	NO.
				Flow CFM @ 100 psig
	MRV1	AC504	5	21
	MRV2	ERC504	5	21
	MRV3	AC505	7.5	29
	MRV4	ERC505	7.5	29
	MRV5	AC507	10	39
	MRV6	ERC507	10	39
	MRV7	AC511	15	60
	MRV8	ERC511	15	60
	MRV9	AC515	20	75
	MRV10	ERC515	20	75
	MRV13	AC1018	30	101
	MRV14	ERC1018	30	101
	MRV15	AC1022	40	124
	MRV16	ERC1022	40	124
	MRV17	ERC1030	40	150
	MRV18	ERC2037	50	205
	MRV19	ERC 2045	60	245
	MRV20	EM750	75	335
	MRV21	EM1000	100	460
				Receiver Tanks For Compressors
	MRV22			80 Gal. w/NEMA 4 Solenoid & Elec. Drain
	MRV23			120 Gal. W/ NEMA 4 Solenoid & Elec. Drain
	MRV24			240 Gal. W/ NEMA 4 Solenoid & Elec. Drain	BACK TO TOP
13. AIR SPARGING - ACCESSORIES
	PART	MODEL	DIA	DESCRIPTION
	NO.		(in)
				Pressure Regulators
	PRG1		1/2
	PRG2		1
	PRG3		2
				Inline Filters
	FIL1		1/2	Particulate Filter
	FIL2		1
	FIL3		2
	COA1		1/2	Coalescing Filter
	COA2		1
	COA3		2
	ACF1		1/2	Activated Carbon Filter
	ACF2		1
	ACF3		2
	PIP1			Filter/Regulator Mounting and Piping on Skid
				Flow Meters
	VFM1		2	Venturi Type Direct Read Flow Meter
	VFM2		3
	VFM3		4
	DRF1		2	ERDCO Series 3200 Direct Read
	VAF1		1/2	Variable Area Direct Read
	VAF2		3/4
	VAF3		1
	APT1			Averaging Pitot Tube w Magnehelic Gauge
				Gauges
	TGE1			0-300 F Temperature Gauge
	PGE1			0-30 psig Pressure Gauge
				Air Sparging Manifolds
	ASM1		1/2	2 Steel Legs w/ Ball Valve, Pressure Gauge
	ASM2			Manifold Extension (per Leg)
	ASM3		1
	ASM4			ea. Additional Leg
	ASM5		2
	ASM6			ea. Additional Leg
				NEMA 4 Solenoid Valves
	NSV1		1/2
	NSV2		1
	NSV3		2
				Nema 7 Solenoid Valves
	NSV4		1/2
	NSV5		1
	NSV6		2
				Switches
	HPS1			High or Low Pressure Switch
	HTS1			High Discharge Temp Switch (Remote Bulb)
14. HEAT TRANSFER EQUIPMENT
A.	Heat Exchangers
				-assumed 200º outlet, 90º ambient, 104º target temp
	PART	MODEL	DIA.	DESCRIPTION
	NO.		(IN)
				Passive Finned
	HE1	FLT	1.5	Finned Tube Heat Exchanger (5 ft. sections)
				Low Pressure Drop Air/Air Heat Exchangers
	HE2	ACA3302-3	3	250 SCFM Nominal Flow  w/ TEFC Motor
	HE3	ACA3302-3exp		w/ EXP motor
	HE4	ACA3363-3	4	500 SCFM Nominal Flow w/ TEFC Motor
	HE5	ACA3363-3exp		w/ EXP motor
	HE6	ACA6362-3	6	750 SCFM Nominal Flow w/ TEFC Motor
	HE7	ACA636-3exp		w/ EXP motor	BACK TO TOP
	HE8	ACA3363-3	8	1000 SCFM Nominal Flow w/ TEFC Motor
	HE9	ACA3363-3exp		w/ EXP motor
				High Pressure Forced Air/Air Heat Exchangers
	HE10	ACA3182-3	0.25	35-50 SCFM Nominal Flow w/ TEFC Motor
	HE11	ACA3182-3exp	0.25	35-50 SCFM Nominal Flow w/ XP Motor
	HE12	ACA3242-3	0.25	65 -150SCFM Nominal Flow w/ TEFC Motor
	HE13	ACA3242-3exp	0.25	65-150 SCFM Nominal Flow w/ XP Motor
	HE14	ACA3302-3	0.5	200-300 SCFM Nominal Flow w/ TEFC Motor
	HE15	ACA3302-3exp	0.5	200-300 SCFM Nominal Flow w/ XP Motor
B.	Compressed Air Dryers
	PART	MODEL	DIA.	DESCRIPTION
	NO.		(IN)
	CAD1	CDR10	3/8	Refrigerated Compressed Air Dryer
	CAD2	CDR150	3/8
	CAD3	CDR25	3/4
	CAD4	CDR35	3/4
	CAD5	CDR59	1
	CAD6	CDR75	1
	CAD7	CDR100	1
	CAD8	CDR150	1.5
	CAD9	CDR200	2
		Heat Exchangers		Air Dryer
15. CONTROL PANELS
A.	Control Panel Boxes
	Standard Features:
	- Hoffman Concepts Steel Box
	- Lockable
	PART	MODEL		DESCRIPTION
	NO.			Controls with SCADA
				NEMA 4 Control Boxes
	CB1	CP		30" x 30" for 1-3 motors	BACK TO TOP
	CB2	CP		36" x 36" for 4-6 motors
	CB3	CP		42" x 36" for 1-5 large motors (>=25 HP)
	CB4	CP		48" x 42" for 6-8 large motors (>=25 HP)
B.	Disconnects (Primary Circuit Protection)
	PART	MODEL		DESCRIPTION
	NO.
				Disconnects In Panel
	DIS1	CP		100 Amp Disconnect
	DIS2	CP		100 Amp Fused Disconnect
	DIS3	CP		200 Amp Disconnect
	DIS4	CP		200 Amp Fused Disconnect
				Ext. Disconnects in NEMA 4 Enclosure
	DIS5	CP		100 Amp Fused Disconnect
	DIS6	CP		200 Amp Fused Disconnect
C.	Motor Controls (based on motor size)
	Standard Features:
	- Circuit breaker or fused circuit protection
	- Motor contactor
	- Illuminated HOA switch or green run light
	PART	MODEL		DESCRIPTION
	NO.
				Motor Size
	MC1	CP		1/2 HP to 3 HP
	MC2	CP		5 HP
	MC3	CP		7.5 HP to 10 HP
	MC4	CP		15 HP
	MC5	CP		20 HP
	MC6	CP		25 HP
	MC7	CP		30 HP
	MC8	CP		40 HP
	MC9	CP		50 HP
D.	Control Panel Accessories
	PART	MODEL		DESCRIPTION